| Payment Type: | L/C,T/T,Paypal |
| Incoterm: | FOB,CFR,CIF |
| Transportation: | Ocean,Air |
| Port: | Shanghai |
Model No.: YZPST-KN1000A25-BSTR62166
Brand: YZPST
Type: Intrinsic Semiconductor
Asymmetric thyristors
YZPST-KN1000A25-BSTR62166
ELECTRICAL CHARACTERISTICS AND RATINGS
Asymmetric thyristors Type:YZPST A60120
Notes:
All ratings are specified for Tj=25 oC unless
otherwise stated.
(1) All voltage ratings are specified for an applied
50Hz/60zHz sinusoidal waveform over the
temperature range -40 to +125 oC.
(2) 10 msec. max. pulse width
(3) Maximum value for Tj = 125 oC.
(4) Minimum value for linear and exponential
waveshape to 80% rated VDRM. Gate open.
Tj = 125 oC.
(5) Non-repetitive value.
(6) The value of di/dt is established in accordance
with EIA/NIMA Standard RS-397, Section
5-2-2-6. The value defined would be in addi-
tion to that obtained from a snubber circuit,
comprising a 0.2 F capacitor and 20 ohms
resistance in parallel with the thristor under
test.
Blocking - Off State
| VRRM (1) | VDRM (1) |
| 20 | 1800 |
VRRM = Repetitive peak reverse voltage
VDRM = Repetitive peak off state voltage
| Repetitive peak reverse leakage and off state leakage | IRRM / IDRM
| 100 mA
|
| Critical rate of voltage rise | dV/dt (4) | 1000 V/msec |
Conducting - on state
| Parameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
| Average value of on-state current | IT(AV)M |
| 1000 |
| A | Sinewave,180o conduction,Tsink=55oC |
| RMS value of on-state current | ITRMS |
| 2000 |
| A | Nominal value |
| Peak one cPSTCle surge (non repetitive) current |
ITSM |
|
20
|
| KA | 10.0 msec (50Hz), sinusoidal wave- shape, 180o conduction, Tj = 125 oC |
| I square t | I2t |
| 2x106 |
| A2s | 10.0 msec |
| Latching current | IL |
| - |
| mA | VD = 24 V; RL= 12 ohms |
| Holding current | IH |
| 1000 |
| mA | VD = 24 V; I =2.5 A |
| Peak on-state voltage | VTM |
| 2.42 |
| V | ITM =2000 A; Tj = 125 oC |
| Critical rate of rise of on-state current (5, 6) | di/dt |
| - |
| A/ms | Switching from VDRM £ 1000 V, non-repetitive |
| Critical rate of rise of on-state current (6) | di/dt |
| 800 |
| A/ms | Switching from VDRM £ 1000 V |
ELECTRICAL CHARACTERISTICS AND RATINGS
Gating
| Parameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
| Peak gate power dissipation | PGM |
| 30 |
| W | tp = 40 us |
| Average gate power dissipation | PG(AV) |
| 5 |
| W |
|
| Peak gate current | IGM |
| - |
| A |
|
| Gate current required to trigger all units | IGT |
| - 300 - |
| mA mA mA | VD = 6 V;RL = 3 ohms;Tj = -40 oC VD = 6 V;RL = 3 ohms;Tj = +25 oC VD = 6 V;RL = 3 ohms;Tj = +125oC |
| Gate voltage required to trigger all units
| VGT |
| - 3.0 - |
| V V V | VD = 6 V;RL = 3 ohms;Tj = -40 oC VD = 6 V;RL = 3 ohms;Tj = 0-125oC VD = Rated VDRM; RL = 1000 ohms; Tj = + 125 oC |
| Peak negative voltage | VGRM |
| 5 |
| V |
|
Dynamic
| Parameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
| Delay time | td |
| 1.6 | 0.8 | ms | ITM =500 A; VD = Rated VDRM Gate pulse: VG = 20 V; RG = 20 ohms; tr = 0.1 ms; tp = 20 ms |
| Turn-off time (with VR = -50 V) | tq |
| - | 25 | ms | ITM =1000 A; di/dt =25 A/ms; VR ³ -50 V; Re-applied dV/dt = 20 V/ms linear to 80% VDRM; VG = 0; Tj = 125 oC; Duty cPSTCle ³ 0.01% |
| Reverse recovery charge | Qrr |
| - | - | mC | ITM =1000 A; di/dt =25 A/ms; VR ³ -50 V |
* For guaranteed max. value, contact factory.
THERMAL AND MECHANICAL CHARACTERISTICS AND RATINGS
| Parameter | Symbol | Min. | Max. | Typ. | Units | Conditions |
| Operating temperature | Tj | -40 | +125 |
| oC |
|
| Storage temperature | Tstg | -40 | +150 |
| oC |
|
| Thermal resistance - junction to case | RQ (j-c) |
| - - |
| K/W | Double sided cooled Single sided cooled |
| Thermal resistance - case to heatsink | RQ (c-s) |
| - - |
| K/W | Double sided cooled Single sided cooled |
| Thermal resistance - junction to heatsink | RQ (j-s) |
| 0.02 0.04 |
| K/W | Double sided cooled Single sided cooled |
| Mounting force | P | 19 | 26 |
| kN |
|
| Weight | W |
|
| - | g | about |
* Mounting surfaces smooth, flat and greased
Note : for case outline and dimensions, see case outline drawing in last page of this Technical Data
Tel: 86-514-87782298
Whatsapp: +8613805278321
Address: 3rd Floor, Weiheng Building No.20 B Area, Yangzhou, Jiangsu China
Website: https://www.yzpst.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now