Yangzhou Power Thyristors Welding Machine
Get Latest Priceنوع پرداخت: | L/C,T/T,Paypal |
اینکوترم: | FOB,CFR,CIF |
حمل و نقل: | Ocean,Air |
بندر: | SHANGHAI |
نوع پرداخت: | L/C,T/T,Paypal |
اینکوترم: | FOB,CFR,CIF |
حمل و نقل: | Ocean,Air |
بندر: | SHANGHAI |
مدل شماره: YZPST-R355SH12FLO
نام تجاری: YZPST
Thyristor Fast High-Power Switch
YZPST-R355SH12FLO
HIGH POWER THYRISTOR FOR PHASE CONTROL APPLICATIONS
Features: . Guaranteed Maximum Turn-Off Time. Interdigitated Amplifying Gate Configuration. All Diffused Structure. High dV/dt Capability. Pressure Assembled Device
ELECTRICAL CHARACTERISTICS AND RATINGS
VRRM (1) |
VDRM (1) |
VRSM (1) |
1200 |
1200 |
1300 |
VRRM = Repetitive peak reverse voltage
VDRM = Repetitive peak off state voltage
VRSM = Non repetitive peak reverse voltage (2)
Repetitive peak reverse leakage and off state leakage |
IRRM / IDRM |
20 mA 150mA (3) |
Critical rate of voltage rise |
dV/dt (4) |
200 V/msec |
Notes:
All ratings are specified for Tj=25 oC unless otherwise stated.
(1) All voltage ratings are specified for an applied 50Hz/60zHz sinusoidal waveform over the temperature range -40 to +125 oC.
(2) 10 msec. max. pulse width
(3) Maximum value for Tj = 125 oC.
(4) Minimum value for linear and exponential waveshape to 80% rated VDRM. Gate open. Tj = 125 oC.
(5) Non-repetitive value.
(6) The value of di/dt is established in accordance with EIA/NIMA Standard RS-397, Section 5-2-2-6. The value defined would be in addition to that obtained from a ubber circuit,comprising a 0.2 F capacitor and 20 ohmsresistance in parallel with the thristor under test.
Conducting - on state
Parameter |
Symbol |
Min. |
Max. |
Typ. |
Units |
Conditions |
Max. average value of on-state current |
IT(AV)M |
|
1271 |
|
A |
Sinewave,180o conduction,Tc=55oC |
RMS value of on-state current |
IT(RMS)m |
|
2599 |
|
A |
Nominal value |
Peak one cPSTCle surge (non repetitive) current |
ITSM |
|
-
18.0 |
|
kA
kA |
8.3 msec (60Hz), sinusoidal wave- shape, 180o conduction, Tj = 125 oC 10.0 msec (50Hz), sinusoidal wave- shape, 180o conduction, Tj = 125 oC |
I square t |
I2t |
|
1.62x106 |
|
A2s |
8.3 msec |
Latching current |
IL |
|
- |
|
mA |
VD = 24 V; RL= 12 ohms |
Holding current |
IH |
|
1000 |
|
mA |
VD = 24 V; I = 2.5 A |
Peak on-state voltage |
VTM |
|
2.02 |
|
V |
ITM = 2000 A |
Critical rate of rise of on-state current (5, 6) |
di/dt |
|
1500 |
|
A/ms |
Switching from VDRM £ 1000 V, non-repetitive |
Critical rate of rise of on-state current (6) |
di/dt |
|
1000 |
|
A/ms |
Switching from VDRM £ 1000 V |
Gating
Parameter |
Symbol |
Min. |
Max. |
Typ. |
Units |
Conditions |
Peak gate power dissipation |
PGM |
|
30 |
|
W |
|
Average gate power dissipation |
PG(AV) |
|
2 |
|
W |
|
Peak gate current |
IGM |
|
- |
|
A |
|
Gate current required to trigger all units |
IGT |
|
300 |
|
mA |
VD = 10 V;IT=3A;Tj = +25 oC
|
Gate voltage required to trigger all units
|
VGT |
|
3.0 |
|
V
|
VD = 10 V;IT=3A;Tj = +25 oC
|
Peak negative voltage |
VRGM |
|
5 |
|
V |
|
Dynamic
Parameter |
Symbol |
Min. |
Max. |
Typ. |
Units |
Conditions |
Delay time |
tgd |
|
1.0 |
- |
ms |
VD=67% VDRM, IT=2000A, di/dt=60A/us, IFG=2A, tr=0.5us, Tj=25C |
Turn-on time |
tgt |
|
2.0 |
- |
|
|
Turn-off time (with VR = -5 V) |
tq |
- |
- |
15 |
ms |
ITM=1000A, tp=1000us, di/dt=60A/us, Vr=50V, Vdr=80%VDRM, dVdr/dt=20V/us |
Reverse recovery current |
Irm |
|
- |
|
A |
ITM=4000A, tp=2000us, di/dt=60A/us |
THERMAL AND MECHANICAL CHARACTERISTICS AND RATINGS
Parameter |
Symbol |
Min. |
Max. |
Typ. |
Units |
Conditions |
Operating temperature |
Tj |
-40 |
+125 |
|
oC |
|
Storage temperature |
Tstg |
-40 |
+150 |
|
oC |
|
Thermal resistance - junction to case |
RQ (j-c) |
|
- - |
|
K/kW |
Double sided cooled Single sided cooled |
Thermal resistamce - case to sink |
RQ (c-s) |
|
- - |
|
K/kW |
Double sided cooled * Single sided cooled * |
Thermal resistance - junction to case |
RQ (j-s) |
|
24 48 |
|
K/kW |
Double sided cooled Single sided cooled |
Mounting force |
F |
19 |
25 |
- |
kN |
|
Weight |
W |
|
|
- |
Kg |
about |
* Mounting surfaces smooth, flat and greased
Note : for case outline and dimensions, see case outline drawing in page 3 of this Technical Data
بیانیه حفظ حریم خصوصی: حریم خصوصی شما برای ما بسیار مهم است. شرکت ما قول می دهد که اطلاعات شخصی شما را برای هرگونه مجوزهای صریح خود برای هرگونه گسترش فاش نکند.
اطلاعات بیشتری را پر کنید تا بتواند سریعتر با شما در تماس باشد
بیانیه حفظ حریم خصوصی: حریم خصوصی شما برای ما بسیار مهم است. شرکت ما قول می دهد که اطلاعات شخصی شما را برای هرگونه مجوزهای صریح خود برای هرگونه گسترش فاش نکند.