Trade Assurance Best Thyristor with Quality Assurance

Trade Assurance Best Thyristor with Quality Assurance

Get Latest Price

نوع پرداخت:	L/C,T/T,Paypal
اینکوترم:	FOB,CFR,CIF
حمل و نقل:	Ocean,Air
بندر:	SHANGHAI

اکنون تماس بگیرید

توضیحات محصول

ویژگی های محصول

توضیحات محصول

ویژگی های محصول

مدل شماره: YZPST-N195CH16

نام تجاری: YZPST

توضیحات محصول

HIGH POWER THYRISTOR FOR PHASE CONTROL

YPPST-N195CH16

Best thyristor 1600V, Features:. Interdigitated Amplifying Gate Configuration

. Guaranteed Maximum Turn-Off Time . High dV/dt Capability . All Diffused Structure Pressure Assembled Device.

ELECTRICAL CHARACTERISTICS AND RATINGS

Blocking - Off State

VRRM (1)	VDRM (1)	VRSM (1)
1600	1600	1700

V_RRM = Repetitive peak reverse voltage

V_DRM = Repetitive peak off state voltage

V_RSM = Non repetitive peak reverse voltage (2)

Repetitive peak reverse leakage and off state leakage

I_{RRM
/}I_DRM

5 mA

50 mA (3)

Critical rate of voltage rise

dV/dt (4)

1000 V/msec

Notes:

All ratings are specified for Tj=25 oC unless otherwise stated.

(1) All voltage ratings are specified for an applied 50Hz/60zHz sinusoidal waveform over the temperature range -40 to +125 oC.

(2) 10 msec. max. pulse width

(3) Maximum value for Tj = 125 oC.

(4) Minimum value for linear and exponential waveshape to 80% rated VDRM. Gate open. Tj = 125 oC.

(5) Non-repetitive value.

(6) The value of di/dt is established in accordance with EIA/NIMA Standard RS-397, Section 5-2-2-6. The value defined would be in addition to that obtained from a ubber circuit,comprising a 0.2 F capacitor and 20 ohmsresistance in parallel with the thristor under test.

Conducting - on state

Parameter	Symbol	Min.	Max.	Typ.	Units	Conditions
Max. average value of on-state current	I_T(AV)_M		400		A	Sinewave,180^o conduction,T_c=55^oC
RMS value of on-state current	I_TRMS		900		A	Nominal value
Peak one cPSTCle surge (non repetitive) current	I_TSM		- 4.3		kA kA	8.3 msec (60Hz), sinusoidal wave- shape, 180^o conduction, T_j = 125 ^oC 10.0 msec (50Hz), sinusoidal wave- shape, 180^o conduction, T_j = 125 ^oC
I square t	I²t		96x10³		A²s	8.3 msec
Latching current	I_L		-		mA	V_D = 24 V; R_L= 12 ohms
Holding current	I_H		250		mA	V_{D =} 24 V; I = 2.5 A
Peak on-state voltage	V_TM		2.09		V	I_TM = 1400 A
Critical rate of rise of on-state current (5, 6)	di/dt		250		A/ms	Switching from V_DRM £ 1000 V, non-repetitive
Critical rate of rise of on-state current (6)	di/dt		125		A/ms	Switching from V_DRM £ 1000 V

Gating

Parameter	Symbol	Min.	Max.	Typ.	Units	Conditions
Peak gate power dissipation	P_GM		30		W
Average gate power dissipation	P_G(AV)		3		W
Peak gate current	I_GM		-		A
Gate current required to trigger all units	I_GT		250		mA	V_D = 10 V;I_T=3A;T_j = +25 ^oC
Gate voltage required to trigger all units	V_GT		2.5		V	V_D = 10 V;I_T=3A;T_j = +25 ^oC
Peak negative voltage	V_RG_M		5		V

Dynamic

Parameter	Symbol	Min.	Max.	Typ.	Units	Conditions
Delay time	t_g_d		2.0	-	ms	V_D=67% V_DRM, I_T=2000A, di/dt=60A/us, I_FG=2A, t_r=0.5us, T_j=25C
Turn-on time	t_gt		-	-
Turn-off time (with V_R = -5 V)	t_q	-	-	150	ms	I_TM=300A, t_p=500us, di/dt=10A/us, V_r=100V, V_dr=67%V_DRM, dV_dr/dt=20V/us
Reverse recovery current	I_r_m		-		A	I_TM=4000A, t_p=2000us, di/dt=60A/us

THERMAL AND MECHANICAL CHARACTERISTICS AND RATINGS

Parameter	Symbol	Min.	Max.	Typ.	Units	Conditions
Operating temperature	T_j	-60	+125		^oC
Storage temperature	T_stg	-60	+125		^oC
Thermal resistance - junction to case	R_Q_(j-c)		- -		K/kW	Double sided cooled Single sided cooled
Thermal resistamce - case to sink	R_Q_(c-s)		- -		K/kW	Double sided cooled * Single sided cooled *
Thermal resistance - junction to case	R_Q_(j-_s₎		80 174		K/kW	Double sided cooled Single sided cooled
Mounting force	F	5	7	-	kN
Weight	W			-	Kg	about