YANGZHOU POSITIONING TECH CO., LTD.
YANGZHOU POSITIONING TECH CO., LTD.
Home> Industry Information> Zero-crossing trigger circuit design based on thyristor

Zero-crossing trigger circuit design based on thyristor

May 09, 2019

Probe current voltage pin 290*3600 needle head diameter is 3.5mm can be too large

Circuit principle : The zero-crossing sync pulse is a pulse of 50Hz AC voltage zero-crossing moment, which can make the thyristor trigger the conduction when the AC voltage sine wave crosses zero. The zero-crossing sync pulse is generated by the zero-crossing trigger circuit. A more detailed circuit diagram is shown. In the figure, the voltage comparator LM311 is used to convert a 50 Hz sinusoidal alternating voltage into a square wave. The positive and negative edges of the square wave act as the input trigger signals of the two monostable flip-flops respectively. The two narrow pulses of the monostable flip-flop output are mixed by the diode or the gate to obtain the corresponding 220V AC power. Zero sync pulse. This pulse is applied to the temperature control circuit as a trigger sync pulse of the thyristor on the one hand, and to the T0 and T1 terminals of the 8031 as a count pulse on the other hand.

Zero-crossing trigger circuit design based on thyristor

The above is the Zero-crossing trigger circuit design based on thyristor we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> Zero-crossing trigger circuit design based on thyristor
苏ICP备05018286号-1
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send